Hurricane Damage

After Hurricane Irene, Al Goff, Chris Shaw, and Xian Clere inspected the line for damage and found that the high voltage line fell on the overhead wire. This will require a lot of work to fix, replacing cross arms and insulators. We hope to have the repairs made and the museum reopened by Saturday.

Cleaning

On Sunday, Camilo Santiago took the initiative to clean the Members Room. Since the beginning of the year, extraneous materials have been stored in the Members Room and a lot of dirt has been tracked in from outside. Now, the room has been cleaned up and is a comfortable place for volunteers to hang out, eat lunch, and relax after a hard days work.

Out by the section house, I was working on cleaning the grounds. When the section house was being restored, some of the track tools were stored under a tarp outside. The tools have now been moved back into the section house. While I was doing that, I found three level boards. A level board is used to check how much elevation is built into the track. For example, if the level board reads an inch of elevation on the east rail, that means that the east rail is an inch higher than the west rail. For the past few years, we have been using a homemade level board.

Remember, the Annual Meeting is this coming Saturday at 5pm. Earlier in the day, at 2pm, there will be a ceremony for the presentation of the donation from the WLPA.

More Car Shifting

Most of the progress during the day on Saturday included shifting of various cars in preparation for the Annual Meeting.

First thing in the morning, Bill Wall and Bill Pollman stopped by the museum with tires and rims for the trolley bus that is scheduled to be shipped down to Baltimore. They have a similar trolley bus, but they need one of ours (we have three) for parts. The one big hurdle in getting the bus shipped is that it had no tires on it.

George Contrada, Galen Semprebon, Ted Coppola, John Cummins, Dave Coppola and I worked to move the Bangor & Aroostook Railroad Caboose under the Train Shed. In order to do this, we needed to pull the caboose down to the Powerhouse Crossing on the Visitor Center lead tracks so that the access track could be shifted over 2 bays. Then the caboose was pulled back up and pushed under the Train Shed.

Xian Clere and Camilo Santiago worked with Northern Tree Service of Palmer, MA to move around 700 relay ties that have been donated to the museum. The ties are now sitting on the back road to the loop.

Up in the shop, John Pelletier was working with another volunteer to service additional cars. They were able to finish working on Fair Haven & Westville Railroad Car 355 and Illinois Terminal PCC 451. Later in the day, Springfield Terminal Car 16 was brought up to the shop and minor repairs were continued on the car.

After operations was finished for the day, Camilo Santiago, Xian Clere, George Contrada, and John Cummins completed a switching operation which included moving the Reading Caboose to the North Road Lay-Up Track and clearing the Northern Barn Lead so that Aurora Elgin & Chicago Interurban 303 can be moved out for the Annual Meeting next weekend.

Morgan von Eisengrein spent the day working diligently in the office with the planning of our new fund raising event for this year, BBQ on the Line. More information on the event will be forthcoming.

Track 1 of Train Shed Takes Shape

Saturday was a very productive day at the museum. Galen Semprebon, along with his son Brian, led a group of community service volunteers in building track 1 under the Train Shed of the Visitor Center. While doing this, they were able to learn some basic track building principles, such as lining, spiking, and gaging.

Up in the shop, John Pelletier was busy working on a hoist for the wheel lathe. One axle is out from underneath New Orleans Car 836 so once the hoist and tooling are ready, the project can begin.









John Cummins and I were busy working on clean up projects of the property. Some of the area by the Section Houses have been cleared of the material stored there. It is hoped that this will all be able to be cleared. In the past week, a dump truck and flatbed truck have been removed from the property. The tie inserter (rusted yellow piece of equipment) that has been sitting next to the Bradley People Movers has been dragged out of there to the top of the parking lot. The owner of it is supposed to have it removed by the Annual Meeting. In moving it, we were able to rescue a track jack that was buried under it.

On the public side, despite the rain, the museum did exceptionally well on Saturday, Easter Bunny Fun Day. Every time I looked up front, the parking lot was full and operations was running double sections of cars.

And the Trucks are Finally off the Front Lawn!

Over the weekend, a lot was accomplished at the museum. I started off the day in Kelly Yard with a hard working crew of volunteers. We were able to replace three more switch timbers in the yard before lunch. I was also able to get the hi rail gear working on our hi rail truck. Pat McCann was able to cut a bit off of the handle for the hi rail gear so that we are able to use it easily. Before, it was hitting the ground before the hi rail gear was fully up.

In the car shop, Galen Semprebon and John Pelletier were able to jack up New Orleans car 836 and pull the truck out from under it. The car is in the shop to have the wheelsets fixed due to thin flanges. The truck was removed from under the car and disassembled.

John Cummins and Morgan von Eisengrein were able to help me move the two sets of Peckam trucks off of the front lawn. For a long time, they have been an eyesore in the corner of the front lawn. They are now sitting on the truck track on the back side of the property. We were also able to move Connecticut Company car 771 (Consolidated Railway car 189) back under the train shed and move the snow plow blade for Gardner & Templeton Snow Plow 12 back in front of the snow plow.

Xian Clere spent a good portion of the weekend working on the computers. All of the old printers, copiers, computers, and monitors that are broken or otherwise unusable have been moved outside for a company to recycle. They are willing to dispose of them free of charge because we are a non-profit.

Overall, a lot was able to get accomplished over the weekend. We are open all week this week for school vacation week and next Saturday is Easter Bunny Fun Day!

Kelly Yard Track Work

Kelly Yard is finally getting the rebuilding that it has needed for a long time. And doing this, we are able to teach some of the younger volunteers how to do track work. On Saturday morning, Camilo Santiago and I got together with Henry Kutash and some of the younger guys - Brian Semprebon, Alex Aberdale, David Coppola, and David Lesniak - to show them how to properly do track work. These guys learned a lot and we were all able to replace 7 switch timbers in the Kelly 1-3 Switch. They got a chance at learning to properly tamp and spike ties as well. They all did remarkably well. We will be attempting to finish the timber replacement next Saturday morning beginning at 9am. All are welcome.

Under the Visitor Center Train Shed, Galen Semprebon led a crew grading the fill to build the track for Connecticut Company Cars 0206 and 1739. Todd Chicoine and his father Paul were busy using the front end loader and bulldozer grading the path for the temporary access tracks.


Up in the Lusa Car Shop, John Pelletier was busy with some new volunteers finishing the servicing of Fair Haven & Westville Railroad 355. The air compressor armature was reinstalled in the car and the car was returned to service. They also cleared the area in front of the lathe. Galen also was able to break free from working under the Train Shed to service Montreal Tramways Observation Car 4. At the end of the day, 355 was released into service and Illinois Terminal PCC 451 was moved to the car shop.

Behind the Visitor Center, John Cummins and Morgan von Eisengrein were working to cut and remove overgrown trees.

With all of the things that were going on Saturday, we still had many volunteers running streetcars in Public Operation. It was great to see so many volunteers, and so many visitors at the museum.

In Like a Lion

March has come in like a lion this year, and I am not talking about the weather. After a few weekends where not much has been happening, everyone seemed to be in full swing this weekend to get all of the Winterfest materials OUT of the Visitor Center. It started off in the morning with Galen & Brian Semprebon helping me load out the boxes of Winterfest into the trailer. Larry Lunden arrived soon after and helped shuttle the boxes to the door where we moved them to the trailer. When Roger Pierson arrived, he went up to Kelly Car Barn and removed the decorations from cars 4 and 1326. After lunch, Ted Coppola and I repaired the roof of the Winterfest Layout Trailer using flashing and pop-rivets. The large modular layout was then moved into the trailer by George Contrada, Dave Coppola, and Brian Semprebon.

Once all of the layouts are moved into the trailers, we will be able to shift cars around to set up the Visitor Center. The plan is to bring the Bobber Caboose into the Visitor Center paired with the Ponemah to have an enhanced exhibit on Trolley Freight Service.

Up in the shop, John Pelletier was busy cleaning, again. Pretty soon, everything will be in its place and we will be able to find the tool we need when we need it. Pat McCann was kept busy working on 2600's motor and motor support bearing. Within the next few weeks, the car will be jacked and the motor will be reinstalled in the car.

Unfortunately, it was quite busy so I was unable to get very many pictures of the day.

This year should be a very exciting year, and we could definitely use your help! We have many projects this year, some of them as follows: repairs to the Bangor & Aroostook Railroad Caboose, repairs and repainting of Engine 18, repairs to the open passenger car, and the repairs to the wheel-sets of New Orleans car 836.

Winter Work Space

Now that Thanksgiving has come and gone, we are into Winterfest full swing. Since the line and the hall are done, we were able to get back to some other things at the museum. Galen Semprebon began to set up a workshop in the upstairs storage rooms that were originally built as a projection room. This workshop will become an area for the shop staff to work during the cold months on small parts like brake stands, door motors, and windows. From mid December to mid March, it is much too cold to work in the shop because there is no heat.

Out back, Paul and Todd Chicoine continued to work on grading the parking area behind the Fire Museum. This serves two purposes. It will allow us to move trucks and other construction equipment out back, and it will allow the Bus Museum to get their UConn bus out which has been sitting amongst the trees for a long time. The trolley poles that were sitting in the parking lot have been moved as well.

Car Relocations

Yesterday, with the help of Ernie Darrow, Brian Semprebon, and David Coppola, we got ConnCo Open 840 switched out of the car shop and into Woods Barn. We first had to push the Elevated car 4436 all the way to the back. At this point Woods Barn is bursting at the seams. Both tracks of the barn have two cars on them that just allow the doors to close. Car 840 was moved out of the shop for two reasons. First, Fair Haven & Westville open 355 had to be moved into the shop to rebuild the Air Compressor. It is not a good idea to have both Connecticut Open Cars in one building. Second, in the coming weeks, work is going to be done over the dead track of the shop so the car could not sit there.

Out in the parking lot, Todd and Paul Chicoine were hard at work starting and early regrading the upper lot. There was a pile of old telephone poles stacked in the lot that they used to delineate the edges of the parking lot with. Hopefully by next weekend we will have the parking lot opened up all the way to the Northern Barn tracks. Ted Coppola and Pat McCann kept busy cutting down trees that were along the edge of the newly reclaimed parking lot.

Pumpkin Patch was a huge success on both Friday and Saturday. There was little space in the parking lot both days for additional parking. New this year to Pumpkin Patch is a scavenger hunt for the children to do..."Help Ponemah Learn to Run". "Ponemah" is our Ponemah Mills Locomotive built by General Electric. The children need to find the ghosts in the main hall that tell them what the next step is to start a trolley car. When they are done, they can turn it in for a prize. Of course, the favorite part of the event for the children is when they get to go out to the Pumpkin Patch at Airport Station and pick out their pumpkin. We can still use help for Pumpkin Patch for both motormen and people in the Visitor Center. If you would like to help, contact Carol at the museum.











Rails to the Darkside was also a huge success both nights. The West End has once again expanded to include an additional trolley car, and we have many new features. On Friday night, we had 150 riders, and on Saturday night we had over 300 riders. This is much better than last year's first weekend. We have an excellent cast in both the Visitor Center West End and the Newberry Siding East End. We can still use help from cast members, motormen, and people in the parking lot, so if you would like to help out, come by the museum Friday or Saturday nights at around 6pm.

Tornado hits Museum's Trailers

Actually, it wasn't exactly a tornado, but it sure looks like one has hit. On Saturday, Todd and Paul Chicoine spent the day getting another trailer ready to be removed from the property. One of the main goals this year has been to clean up the property. We have accomplished quite a lot by getting rid of the trailers in the parking lot, the scrap metal pile inside the loop, the junk stored underneath the train shed, and moving the three Connecticut Company cars out of the Hartman's Siding Lay Up track. In addition, we cleaned up the gardens in front of the Visitor Center and installed a fence between the parking lot and front lawn. Paul and Todd emptied out the trailer of the materials stored in it. Everything inside the trailer was moved to the storage room off of the gift shop. Then, with the help of the front end loader, the trailer was crushed. The trailer should be removed from the property by next weekend.

Xian Clere used the afternoon to continue to clean out the Bangor & Aroostook Caboose. He brought a vacuum out to the caboose to clean the floor and cushions. We are still looking for donations to help offset the cost of moving the caboose and the work that the caboose needs.

Rails to the Darkside has progressed much over the weekend. The set up of the main hall is almost completed with all of the curtains in place and the lighting set up. The Graveyard posts have been set up with the gravestones, lighting, and fencing. We gained a couple of new cast members at the Rails to the Darkside Casting Call, however, we are still looking for more cast. A rehearsal is scheduled for Thursday night. If you are interested in helping out for Rails to the Darkside, contact office@ceraweb.org.

Up in the shop, John Pelletier and Pat McCann began setting up the storage pod. The storage pod will be used to store paints, oils, and other flammable materials so they are not stored in the car shop. Boston Elevated 5645 has been released from the shop. While in the shop, whistles were installed on the car, door motors were repaired, and missing windows were replaced. Springfield Terminal 16 was moved up to the shop to have windows repaired and the motor support bearings repacked.